Taillights

- Modes include High Flash, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 7.5 hours - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports

Features: - Up to 20 lumens ANSI standard approved - Runtime: Day mode 4 hrs., High 8 hrs., Middle 15 hrs., Flash 30 hrs. - Li-Po rechargeable battery - Low power indicator - Motion sensor include - IPX4 waterproof rating - Charge via Micro USB cable

With the push of a button, the 2’Fer can switch between a white 60 lumen front light and a red 20 lumen rear light. Holding the button for 2 seconds turns the light on and off, and pushing the button once changes modes between white solid, red solid, white flashing and red flashing. The light also remembers which mode you were last using and turns on in that mode. - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-65 standard - 3 hour recharge time - 18g / 0.04lb each As Front: - 60 Lumens - Runtime: High 1.5hrs, Flashing 5hrs As Rear: - 20 Lumens - Runtime: High 1.5hrs, Flashing 5hrs

The 2'Fer-XL is the big brother of Blackburn's popular 2'Fer light. This light works hard, pulling double duty as either a 200 lumens front or a 40 lumens rear light, depending on your needs. The clever mount design lets you easily pop it onto your bike's handlebar or seat post, or use the clip to mount it on your backpack or belt. Features: - Meets ANSI FL-1 standard - Front or rear capable - Excellent side visibility - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-67 standard - Optimized Lenses - LED Fuel Gauge/Charge Indicator - Aluminum construction - 3 hour recharge time - 78g / 0.17lb each Front: - 200 Lumens - Runtime: High 2hrs, Flashing 6hrs Rear: - 40 Lumens - Runtime: High 4hrs, Flashing 12hrs

Stay clean and stay seen with Topeak's DeFender iGlow. It's a unique rear fender that has an integrated 0.5W light for safety at night or during low-visibility conditions. Strap this impact-resistant plastic fender down quickly and easily to the junction of your bike's seat and top tubes, and adjust it for perfect coverage. With constant and blinking modes, this light is ready when you are.

The RedLite 80 BT features 80 lumens and five lighting modes that can be wirelessly controlled via Bluetooth 5.0 by WhiteLite 800 BT or TetraBand BT. Bidirectional tool-free mounting with the included silicone strap for quick installation and removal on aero/round seatposts or seatstays - Battery: Li-Ion - Recharge Type: USB - Lumens: 80 - Lamp: Red COB 3W LED - Battery: 3.7V 1000mAh Lithium Ion (integrated) - Control: 5 modes (High 800 lm - 2.5hrs / Middle 400 lm - 5 hr / Low 200 lm - 9 hr / Blink - 200lm - 20 hr / Pulse 400 lm - 15 hr) - Charge/Charge Time: USB-C / 2 hr - Reserve Time: 0.5 hr - Mount: Strap mount fits aero or round seatposts (25.4 - 34.9mm), seatstay, and Topeak bags - Size: 3.2" x 1.5" x 1.3" - Weight: 51g. - Color: Black

Dual-color, USB rechargeable, ultra-bright tail light with four lighting modes features a spot/flood beam providing 100 lumens of extreme rear visibility. Silicone strap provides bi-directional tool-free mounting and easy removal on aero or round seatposts, or helmet. - Max Luminous Intensity: 100 Lumens - Light: 9 super bright LED's - Light housing: Engineering grade polymer - Battery: 3.7 V 700mAh Lithium-Ion (integrated) - Control/Burn Time (approx): 4 modes / 3 hr (Constant) / 5 hr (Blinking+Constant) / 10 hr (Constant+Blink Sequence) / 30 hr (Blinking) - Charging: (approx): USB Type-C / 3-4 hr - Mount: Fits aero or round seatposts (25.4 - 34.9mm), seatstay, Topeak bags, and helmet - Waterproof IPX 6 - Size: 5.7 x 4.1 x 2.5cm / 2.2" x 1.6" x 1" - Weight: 30g / 1.06oz

• A sophisticated rear light right at home on a vintage or town bike • Bright LEDs with genuine polished alloy body • Mounts to seatstay or rack braze-ons • Flashing or steady modes • Includes batteries

Maximize your visibility with this amazing taillight. The Blinky 7 aims 7 bright LEDs directionally to provide over 220 degrees of light visible from up to a mile away! The ultra-compact case is weatherproof, light and durable. And, the Blinky 7 includes a bike mount, clip mount and arm strap. Plus, the included 2 AAA batteries offer run times of up to 100 hours.

-PB power array and reflector provide visibility for up to 1 mile -Steady, Superflash and Courtesy flash modes -Ultra compact case is weatherproof, lightweight, and durable -Rear rack and seat post mounts included -Up to 150 hours of run time on 2 AAA batteries (included) -85 grams

With a dazzlingly bright 28 LED PB Power Array and three modes, this USB rechargeable light is like a Scarlet Begonia for the back of your bike. For added safety, it has a CPSC certified reflector in the lens to keep you visible when the light is off. Versatile mounting options allow you to attach it to your seat post or rear rack with the included brackets. - PB 28 LED power array and CPSC certified reflector provides steady, Courtesy & Superflash modes - FL1 Tested - Run times: 5 hrs (steady – 20 lm), 9 hrs (Courtesy – 6-18 lm) and up to 30 hrs (Superflash - 20 lm) - Provide 160-degrees of visibility - Highly visible, even in daylight - Dust and water resistance rated to IP65 standard - 700 mAh lithium polymer battery charges in 2.5 hours with micro USB cable (included) - Includes rear rack and seat post mounts plus clip mount for multiple mounting options - 65 grams

Planet Bike's Spok Taillight ensures you'll be seen for up to a mile! It boasts a super-bright LED and a translucent casing that allows 220 degrees of visibility. The rubber strap can be used to mount the Spok on seatposts or odd shaped tubes of all sorts and sizes. And, this little baby runs up to 100 hours with the included CR 2032 battery. There's even a keychain hole for portability!

The Superflash 65 brings a whole new level of versatility to battery powered tail lights. With four modes (High, Low, Courtesy and Superflash) this tail light provides 65 lumens and 220° of visibility that will get you noticed day or night. - Cree XBD and high output surface mounted LEDs provide 65 lumen output with high, low, Courtesy and Superflash modes - FL1 Tested - Run times: 40 hrs (high – 30 lm), 90 hrs (low – 7 lm), 45 hrs (Courtesy - 20-60 lm) and up to 130 hrs (Superflash - 65 lm) - Provides 220° of visibility - Highly visible, even in daylight - Dust & water resistance rated to IP64 standard - 2 AAA batteries (included) - Includes seat post and seat stay mounts and horizontal clip mount for multiple mounting options - 70 grams

The 65R is the Superflash tail light on steroids. The Cree XBD LED delivers 65 lumens of brilliance and 220° of visibility to get you noticed day and night. - Cree XBD and high output surface mounted LEDs provide 65 lumen output with high, low, Courtesy and Superflash modes - FL1 Tested - Run times: 7 hrs (high – 30 lm), 12 hrs (low – 7 lm), 5.5 hrs (Courtesy - 13-40 lm) and up to 11.5 hrs (Superflash - 65 lm) - Provides 220° of visibility - Highly visible, even in daylight - Dust & water resistance rated to IP65 standard - 550 mAh lithium polymer battery charges in 2.5 hours with micro USB cable (included) - Smart Charging Technology with built-in low battery indicator - Includes Quick Strap seat post mount - 52 grams

Planet Bike's Superflash USB uses super bright LED's for visibility up to 1 mile. The ultra-compact case is weatherproof, light and durable, and features a soft-touch power switch. A USB-rechargeable lithium ion battery provides up to 36 hours of run time.

Minimal and mighty! The USB rechargeable Asteroid tail light from Portland Design Works mounts in seconds and shines super brightly with high quality optics so you can be seen. The double-click lens prevents accidental ons and offs. Ride up to 35 hours before needing a charge. Pairs nicely with the Asteroid Headlight - also available as a light set. - 3 Modes (burn time): Flash (35 hrs), Pulse (6.5 hrs), Steady (4.5 hrs) - Weatherproof exterior for all season riding - Micro USB recharging cord included - Weight: 76 g (2.7 oz)

Portland Design Works' Danger Zone Taillight will enhance your visibility like the beacon on a jetfighter with two 1/2-watt LEDs. It boasts three modes and includes seatpost, seatstay,. and backpack mounts, too. - ?Two 0.5 watt red LEDs by Nichia Brand - Three modes: zZz, a-HA!, and Rock Steady - Up to 50 hours run time on 2xAAA batteries (included) - Includes Stayputnik seatpost mount - Weatherproof exterior for all season riding - Weight: 57g (2oz)

Portland Design Works' Fenderbot Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and precision reflector to notify others of your presence. And, the Fenderbot bolts directly to your fender so it's always on your bike. - Bright red LED and precision reflector - Bolts directly to fender to prevent theft - Weatherproof exterior for all season riding - Weight: 62 g (2.2 oz) - Runs on 2xAAA batteries (included) - Lifetime PDWarranty

The Gravity Tail Light has a built-in accelerometer that detects deceleration or swerving and automatically changes to a super-bright, solid beam to warn following traffic. - Automatic accelerometer brake light function shines 100 lumens bright - 2 Modes (runtime): Solid - 20 lumens (12 hours), Flash - 80 lumens (30 hours) - USB-rechargeable li-polymer battery - Includes brackets for seatpost and seatstay mounting

The PDW USB-rechargeable Io taillight has two super-bright LEDs for a great value, and offers a super-quick charge time of only 2.5 hours. The Io has 3 different modes, steady, flash, and pulse, and is perfect for urban riding. - 3 modes (runtime) Steady (10h) Flash (20h) Pulse (20h) - Seatstay mount included - UV-proof rubber strap bracket for easy on and off included - Includes Micro USB-recharging cord

The PDW Kepler eBike Tail Light offers up 220 degrees of visibility. Compatible with any 6V-15V system, this light has 3 super-bright red LED's. Equipped with a pre-installed Bosch plug, the Kepler eBike Tail Light is ready to plug directly into any Bosch eBike system. The Bosch plug can also easily be clipped off for direct wiring into other eBike systems. - Seatpost or seatstay mounting - 220 degrees of visibility - 25 Lumens - 48" cable length - Remove Bosch plug to work with any 6V-15V e-bike system

Portland Design Works' Radbot 1000 Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and a precision reflector to notify others of your presence. And, the Radbot includes mounts for a rack, seatpost, seatstay, and backpack, so you can put it wherever you want. - 1.0 watt red LED made by Nichia - 3 Modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time - Large precision reflector - Includes both Stayputnik quick release and Rack mounts - Weatherproof exterior for all season riding - Runs on 2xAAA batteries (included) - Weight: 62 g (2.2 oz) - Lifetime PDWarranty

To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options. Features - Lumen Output: 100 - 4 Modes with a Run Time up to 136h - 2 x AAA Alkaline Battery Powered - Weight: 82g - Battery: 2 x AAA Alkaline - Highly Visible up to 1 Mile - 100 Lumen Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Time - Fast Flash—96:00h - Pulse Flash—136:00h - Steady High—72:00h - Steady Low—127:00h

Emax+ 150 is NiteRider's first taillight specifically made for electric bikes. It comes with a power line that's pre-wired for connection to the eBike's battery. Power line cable measures approximately 52" in length. Taillight powers ON with ignition/ power switch. Features six modes-Steady ON and varying flashes-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 150 - 6 Modes - Hardwired, Voltage 6 to 80 Volts DC - Water / Dust Resistant IP64 Rated - Weight: 75 grams - Fits 22mm-34.9mm seat posts - Includes a pre-wired Emax+ 150 Taillight, Seat Post Clamp Mount, Rubber Mounting Shims, and Rack Mount LIGHT MODES 1) Fast Flash 2) Slow Flash 3) Disco Flash 4) Pulse Flash 5) High Steady 6) Low Steady NiteRider recommends this taillight be installed by an authorized e-bike service and repair shop.

NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly. Lumina Max headlight and NiteLink Remote sold separately. - Maximum 300-lumen output - Run time: 6:00—36:00hrs - Charge time: 2:15hrs - Group Ride Mode: Be seen without distracting fellow cyclists - 2 light levels, 3 flash modes - FL1 Standard IP64 Water Resistant - 79g Includes: - Daylight visible tail light, easy on/off seatpost strap mount, and USB charging cable

The NiteRider Sentinel 250 is designed to increase cycling safety by way of 2 varying flash patterns and 2 steady beams (High/Group Ride Mode). Behind the durable red lens and casing are two powerful LEDs that emit 250 lumens in the brightest Daylight Visible Flash setting, allowing you to be seen day or night. For enhanced safety, the Laser Lane modes (3) are designed to project ultra-bright laser lines on the ground. This creates a virtual lane for the rider, further increasing visibility. - The Sentinel 250 complies with FDA standard for lasers, notice No. 50, 2007 - Daylight Visible Flash (DVF) - Highly visible laser lanes - All in one, Laser and tail light! - Convenient USB rechargeable - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentinel 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light w/ Laser Lanes - Seat post Mount - USB Cable

The NiteRider Sentry Aero 260 is a lightweight, aero taillight featuring dual LED light strips to deliver 260 lumens of Daylight Visible red light. An inner and outer lens design helps to shape light output, producing long-range visibility when viewed directly from the rear, but also providing ample surrounding light to the peripheral, making the Sentry Aero 260 visible from nearly any angle. - Daylight Visible Flash (DVF) - 260 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off Aero seat post strap mount with quick release tab - Aero seat post strap included - Convenient USB rechargeable - Super bright Daylight Visible Flash mode - Innovative Aero shape with excellent side visibility - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentry Aero 260 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seat post Mount - USB Cable

The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h

Long battery life combined with simple, tool-free mounting makes MSW Mouse lights a great economical pick to be seen on the road. - Simple, tool-free mounting on bars from 22.2 - 35mm - 3 lighting modes: high, low, flash - CR2032 battery included

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included