Cables

- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends

- Thermally bonded PTFE coated slick galvanized cable for minimal friction - Premium stainless-slick low-friction, rust-resistant cable - Economy galvanized standard replacement cable - AX-2654 and AX-2657 are double ended, with both Road and MTB anchors - 1700mm length

- Plastic guide with ziptie for securing housing/Tubing nearly anywhere on the bike

- Basic housing and galvanized inner cable with header card - Brake kit includes black casing and a 1.6mm cable - Derailleur kit includes black casing and a 1.2mm cable - Cables have dual ends with leads to fit any brake or shifter

- Premium 31-strand stainless-slick low-friction rust-resistant cable - X-long 3000mm cables for non-traditional uses

- Thermally bonded PTFE-coated slick galvanized cable for minimal friction - 1700mm

- Aluminum guides for securing housing/tubing to frame cable stops or cable guides

- Slotted aluminum barrel adjuster with backing nut for common brake levers

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

- Pre-stretched Teflon coated 19 strand inner wire - new packaging

- Pre-stretched Teflon coated 19 strand inner wire

- Pre-stretched stainless 19-strand inner wire - Slick profile for smooth performance - New Packaging

- Pre-stretched, stainless 19-strand inner wire - Slick profile for smooth performance - 2000mm length - Use: brake - Length: 2000mm - Diameter: 1.6mm - Front/rear set

- Cable and housing set with special ferrules and end caps - Anti-compression housing reinforced with Kevlar and super slick inner sleeve - Prestretched stainless steel inner cable with slick outer profile - Rubber donut frame protectors included

- Cable and housing set with special ferrules and end caps - Anti-compression housing reinforced with Kevlar and super slick inner sleeve - Pre-stretched stainless steel inner cable with slick outer profile - Rubber donut frame protectors included - SRAM and Shimano compatible - Cable diameter: 1.5mm - Casing diameter: 5mm

Our Box One Inner Shift Cable is the perfect upgrade for your Box Three or Box Four cable. It is also an ideal replacement for your Box One or Box Two cable set-up. When combined with our Box One housing it has proved to be superior to most competitive product. We have data that demonstrates lower initial resistance and substantially less difference in resistance over time. FEATURES - Our Best Performing Cable - Slick Coated - Inner Cable 2100mm - (2) 1.8mm Cable End Crimps COMPATIBILITY - Works with 11, 9, 7, 8, 12, and 10 speeds - Weight: 14.6 grams

Box One Linear Brake Cable Kits are among the most advanced BMX brake cables on the market. The custom Concentric housing includes aramid fiber-wrapped aluminum/steel linear wires for the best combination of strength and low weight. The inner Nano Cable wires are treated with a PTFE coating that reduces friction and boosts braking performance. Our anodized aluminum Kollars ferrules further reduce cable drag. Each cable kit includes 79 inches of Concentric Linear housing, a black PTFE-coated Nano Cable, four alloy Kollars ferrules and one color-matched and one black alloy cable end caps. Available in chrome, 14K gold, red, blue and black with alloy Kollars ferrules and end caps.

Our Box One Shift Cable & Housing Kit is the easiest way to get silky smooth and consistent shifts on any drivetrain. Replace your Box One, Box Two, Shimano and SRAM kit, or upgrade your Box Three or Box Four set-up. This kit is a combination of our best performing Cable Housing and Slick Coated Stainless Steel inner cable. In lab tests this combination has proved to be superior to most competitive product. We have data that demonstrates lower initial resistance and substantially less difference in resistance over time. FEATURES - Our Best Performing Cable - Inner Cable 2100mm - Our Best Performing Housing - 4mm Housing 2000mm - Prepared with silicone grease - (2) 1.8mm Cable End Crimps - (3) 4mm Sealed Short Ferrules COMPATIBILITY - Works with 12, 11, 10, 9, and 8 speeds. - Weight: 84.3 grams

380mm long, single-ended straddle for mountain cantilever brakes

- Low-compression outer casing for predictable braking performance - A fully lubricated inner housing liner reduces friction and enhances lever feel - Stainless steel low friction inner cable - Compatible with all cable-actuated road bike brake systems Includes: 4 x Open End Cap, Alloy/Black 3 x Cable Oring, Translucent (1 set = 3pcs) 2 x Frame Protector, Mini Black 2 x Cable Tip, 1.2mm, Alloy/Silver

- 1.5mm x 1700mm advanced die-drawn stainless steel cable is low friction with minimal elongation for smooth and responsive braking performance - Recommend for use with Ciclovation™ Premium or Advanced outer casing systems - Compatible with all cable-actuated road bike brake systems - Compatible with all high-performance outer casing, lubricants, and end caps

- 1.1mm x 2100mm advanced die-drawn stainless steel cable is low friction with minimal elongation for consistently effortless shifting performance - Recommend for use with Ciclovation™ Premium or Advanced outer casing systems - Recommended for 10-speed drivetrains - Compatible with all high-performance outer casing, lubricants, and end caps

- Aluminum straddle cable carrier for cantilever brake

- Dispenser of rubber cable O's

- Stainless steel top tube cable clamp. 4g each

- Nano-polished ultra slick extruded cable is non-coated for ultimate smoothness and durability - Double ended for Shimano/SRAM road and MTB brake levers - Pre-stretched for more responsive braking - 1.5mm x 1700mm

- Nano-polished ultra slick extruded cable is non-coated for ultimate smoothness and durability - Compatible with Shimano/SRAM road and MTB shifters - Pre-stretched for more responsive braking - 1.1mm x 2300mm

- Nano-polished ultra slick extruded cables are non-coated for ultimate smoothness and durability - Compressionless linear strand housing with slick lube liner for reduced friction - Lightweight sealed alloy end caps and alloy cable tips - Compatible with Shimano/SRAM road and MTB shifters Contents: - 1x - 1.1mm x 1500mm cable - 1x - 1.1mm x 2300mm cable - 2.7m - Compression-less 4mm housing - 8x - Black sealed alloy end caps - 2x - Black dirt guard alloy end caps w/ rubber boots - 2x - Black alloy cable tips - 2x - Black rubber cable donuts - 2x - Black rotating hooks

- Nano-polished ultra slick extruded cables are non-coated for ultimate smoothness and durability - Kevlar reinforced compressionless linear strand housing with slick lube liner improves lever feel - Lightweight alloy end caps and cable tips - Compatible with Shimano/SRAM road and MTB brake levers Contents: - 1x - 1.5mm x 1350mm cable - 1x - 1.5mm x 2350mm cable - 3m - Compression-less 5mm housing - 2x - EZ-bend housing segments - 6x - Black alloy end caps - 2x - Black alloy end caps for small frame fittings - 2x - Black alloy cable tips - 2x - Black rubber cable donuts - 2x - Black rotating hooks

Hose fittings for Hayes hydraulic disc brakes available a la carte. Hayes brake compatibility: - HFX-9 - Prime - Sole - El Camino - Radar