Parts

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors

Kit includes: - x2, Bolts (M5) with conical washers (T25 head) - x2, Barrel nuts Compatible with: - REVIVE / REVIVE 2.0 - REVIVE MAX - DIVINE - DIVINE SL - DIVINE SL RASCAL

Comfort was at the forefront of our mind when we started developing The Cloud MK2 Seat. We wanted a saddle that offered comfort and resilient support for week long Enduro events. - Dimensions: 132mm x 275mm - Titanium rails, carbon base - Weight: 235g

These super tough axles are constructed to Fox's exact specifications and made from 7075 Aluminium. Unlike any other fork axles on the market, these feature a unique double hex design. This includes the traditional 6mm that everyone is familiar with but with an added 8mm Allen key fitting as well. This feature makes removal much easier if the 6mm gets chewed up, over tightened or not removed for a long time. Having an Allen key fitting instead of a QR also allows the use of a torque wrench so you can be sure your wheel is correctly tightened. This Axle also comes with a grade 5 titanium pinch bolt and backing nut to finish things off. Clean, simple, and fast! Replacement for Fox PN: 820-09-071-KIT / Service Set: 2021 36-38 15x110 KaboltX Pinch-axle Assembly 820-09-063-KIT / Service Set: 2020 FOX-Marzocchi 15x110 QR Adjust Axle Assembly NOTE: This axle does not fit 2021+ 32 and 34. (Square Arch)

Pre-tension Bolt for Shimano Hollowtech II Cranks and Shimano E-bike motors. Simplify things with an 8mm fitting and add a splash of your favourite anodised color. Never worry about turning the garage upside down at midnight to find that little 'thingy' to pre tension your cranks ever again. - Remember this product needs minimal torque and do not exceed the manufacturers maximum recommended torque 0.7 to 1.5Nm - Suits: XTR, XT, SLX, LX, Deore, Saint & Zee cranks and bikes with a Shimano e-bike motor.

When you've got to finish your bike off right. The Burgtec Stem Spacers are the perfect finishing kit.

"Make a grip with the fussiest rider on the planet, you must be mad!!" The Bartender Pro is the next level in grip design for Burgtec. We've collaborated with 3x World Champion Greg Minnaar to hone the construction of this grip to produce unrivaled vibration dampening. - 31.5mm Diameter. - 30A Rubber Compound - Single Lock On

- Ideal road bike commuting tire - With a thicker layer of tread rubber, the Caldera provides longer-lasting tread wear than a normal road tire - Bead: non-folding - Weight: 330 grams

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS44/28.6/H8/K|ZS56/40/H4/K • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 109g

This is the Bottom for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.

• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown

- Low-compression outer casing for predictable braking performance - A fully lubricated inner housing liner reduces friction and enhances lever feel - Stainless steel low friction inner cable - Compatible with all cable-actuated road bike brake systems Includes: 4 x Open End Cap, Alloy/Black 3 x Cable Oring, Translucent (1 set = 3pcs) 2 x Frame Protector, Mini Black 2 x Cable Tip, 1.2mm, Alloy/Silver

Crank Brothers' 5050 Pin Kit includes 40 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.

Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

- Aluminum straddle cable carrier for cantilever brake

Dimension American bottom bracket for one-piece cranks. - Include cups, bearings and cones - 24 tpi

For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards. - Shot-peened finish - 6061-T6 Aluminum - 9-deg backsweep - 720mm wide - 35mm rise

When there is mud on the course the Donnelly PDX is the tire of choice. It’s race-proven PDX tread and innovative design create the ultimate race ready cyclocross tire. PDX is the airport code for Portland, Oregon, where frequent rains create some of the muddiest cyclocross courses you’ll find anywhere. Although the PDX excels in the mud, this tire is truly an all-conditions performer. The center knobs are aligned to give you a fast roll on hard pack and pavement, no matter what the weather conditions. Aggressive side knobs offer superior cornering, and the leading edge of the knob gives you extra traction for acceleration out of the corner. Whether it’s mud, loose dirt, snow or sand, the PDX can handle it all. Size: - 700 x 33mm Weight: - 314 grams TPI: - 120 Part #: - D10010 Product Features: - Tall and widely spaced knobs for superior mud clearance and traction. - Center knobs are aligned for fast rolling. - Side knobs offer superior cornering. - Soft rubber compound provides extra grip and shock absorption. - Precision design creates a straight tire with no variances in size or alignment. - This tire requires an inner tube. Tubes sold separately.

FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander. - Includes cap, bolt and expander - Top assembly for carbon steerers replaces traditional top cap and star nut assembly

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

FSA (Full Speed Ahead) MegaExo 19 bottom brackets are for use with 19mm diameter spindles. - Die cast and CNC-machined alloy bearing cups - 19mm I.D. - BB86/92 compatible - BB Shell Width (mm): 92 - Bottom Bracket Shell I.D.: 41

True value and performance are found in this FSA road chainring. It offers both long wear life and smooth shifting. - Stamped AL7075/T6 - N11 chainrings are compatible with all 10-speed drivetrains, and compatible with FSA, SRAM and Shimano 11-speed drivetrains - For 46/36T ring combination - Ramped and pinned for excellent shifting - FSA 120 BCD - 4-Bolt

- 1-1/8" / 1.5", 36°/ 45° ACB - For tapered 50mm / 62mm OD head tube - For 1-1/8" to 1.5" tapered fork - Alloy top cover - Upper: Forged alloy cup with ACB (black seal) - Lower: 1.5" CNC machined alloy cup with ACB (black seal) - Stack Height 16.9+2.9=19.8mm - 124.6 grams

Constructed of 4130 chromoly, these Free Agent pegs are built to withstand long, brutal sessions again and again. - Includes spacers for use on 3/8" axles - Cold-forged - 35mm x 90mm - 14mm non-threaded hole - 3/8" spacers included - Sold in pairs - 200g

This rear Mini V-Brake is made with cold-forged arms for strength and durability. - Linear pull and linear spring design - Dual spring tension adjustment - Sized to fit Mini and Micro BMX racing frames

This rear V-Brake is made with cold-forged arms for strength and durability. - Linear pull and linear spring design - Dual spring tension adjustment - 22mm brake pad adjustment - Sized to fit Expert and Pro BMX racing frames

-Flatland/freestyle oriented tread

For maximum comfort and control, check out Giant's Comfort EX Grips. The dual-compound design features soft-density rubber on the main contact areas for padding, while the inner cores are firm rubber for a secure attachment to the handlebars.