Shop Gear

Globally renowned and truly timeless, the B17 Standard is the saddle that secured Brooks' place in cycling history. It's been in constant production since 1910, providing cyclists around the world with over one hundred years of sublime support and unrivaled comfort. Each B17 Standard shapes itself to its rider, leading to a personal, customized saddle that fits like no other. And of course, it features Brooks' full grain, premium leather top secured by their trademark rivets for the ultimate in style, comfort, and durability.

For ultimate kiddo comfort, look no further than the D'Lite X. With adjustable suspension, independently reclining seats, and premium seat pads the D’Lite X bike trailer and stroller combo is all about a comfortable ride and more time outdoors for you and your little ones.

Our Milhouse Handlebar has the distinction of being the first and only of its kind: A full carbon moto-inspired riser bar. Featuring a 16-degree backsweep and 8-degree upsweep for comfort and control, it's tested and approved for getting rad on the roughest terrain. A statement piece for custom builders and upgraders alike, the Milhouse is equally at home on klunkers, bikepacking rigs, singletrack steeds, or simply cruising the streets with style. Trimmable ends marked with easy-to-read graphics allow you to dial in your fit for maximum confidence wherever the trail takes you. - Unidirectional carbon fiber construction - Trimmable ends, made easy with graphic markings - No rider weight limit - ASTM Condition 3 – For rough off-road riding and jumps less than 24" - 90mm clamping area to fit Salsa Anything Cradle - 31.8mm clamp, 70mm rise, 16-degree backsweep, 8-degree upsweep - 825mm wide - Weight: 288g

With double-walled construction to keep water cold twice as long as other bottles, the insulated CamelBak Podium Chill is the best-of-the-best for delivering cold, consistent cycling hydration. Features like optimized cage fit and improved cleanability continue to make this bottle a favorite among professionals and recreational users alike. It is and always has been 100% free of BPA, BPS and BPF. - Double-Walled Construction: Keeps water cold twice as long - Optimized Cage Fit: Engineered to securely fit in a variety of bottle cages - Easy Squeeze: Get more fluid with less effort - High Flow, Self-Sealing Cap: Maximizes flow rate while eliminating splatters and spills - 100% free of BPA, BPS and BPF: Ride clean, drink clean - Easy-to-Clean Interface: All parts can separate for thorough cleaning - Positive Lock out: For leak-proof transport - Trutaste Polypropylene with Hydroguard: Taste your water and nothing else, time after time.

With double-walled construction to keep water cold twice as long as other bottles, the insulated CamelBak Podium Chill is the best-of-the-best for delivering cold, consistent cycling hydration. Features like optimized cage fit and improved cleanability continue to make this bottle a favorite among professionals and recreational users alike. It is and always has been 100% free of BPA, BPS and BPF. - Double-Walled Construction: Keeps water cold twice as long - Optimized Cage Fit: Engineered to securely fit in a variety of bottle cages - Easy Squeeze: Get more fluid with less effort - High Flow, Self-Sealing Cap: Maximizes flow rate while eliminating splatters and spills - 100% free of BPA, BPS and BPF: Ride clean, drink clean - Easy-to-Clean Interface: All parts can separate for thorough cleaning - Positive Lock out: For leak-proof transport - Trutaste Polypropylene with Hydroguard: Taste your water and nothing else, time after time.

With double-walled construction to keep water cold twice as long as other bottles, the insulated CamelBak Podium Chill is the best-of-the-best for delivering cold, consistent cycling hydration. Features like optimized cage fit and improved clean-ability continue to make this bottle a favorite among professionals and recreational users alike. It is and always has been 100% free of BPA, BPS and BPF. Features: - Double-walled construction: keeps water cold twice as long - Optimized cage fit: Engineered to securely fit in a variety of bottle cages - Easy squeeze: get more fluid with less effort - High flow, self-sealing cap: maximizes flow rate while eliminating splatters and spills - 100% free of BPA, BPS and BPF: ride clean, drink clean

Tackle new trails. With authentic off-road style and a comfortable fit, this new helmet delivers it all for aspiring adventurers. Features - Created for the off-road enthusiast seeking performance features but with budget in mind - Trail-specific design with extended rear coverage - AirFlow ventilation system with deep internal AirFlow channels for cooling - Cinch Pro fit system offers optimal coverage by cradling the occipital bone for full protection, support and comfort - Removable, moto-style extended protection side-snap visor - Integrated magnetic mount for the Numen+ Link taillight and GoPro compatible mounting surface - MIPS mimics the brain's own protection system by adding a low friction layer between the head and the helmet, reducing rotational violence that causes strain to the brain at angled impacts

Schwalbe's Marathon Plus is legendary for durability and protection. Their nearly impenetrable 5mm-thick SmartGuard layer almost eliminates flats over the course of the tire's excellent, long life. Whether you're setting out on a cross-country bike tour, cruising on a tandem, or just want peace of mind during your daily commute, the Marathon Supreme is in it for the long haul.

In today’s fast-paced world of riseless flat bars and far-too-aggressive-for-our-liking cockpits, Surly harkens back to simpler times. They wanted a handlebar that would suffice for a relaxed cruise to a favorite windowless bar, but would also be suitable should a person decide to take the long way home. The Sunrise Bar is a cruiser bar, a trail bar, and a BMX bar all rolled into one. It has a 22.2mm clamp diameter, but Surly included some Problem Solvers shims so you can mount it up to your fancy 31.8mm stem. Material: CroMoly steel Clamp diameter: 22.2mm; Includes shims for 31.8mm clamp Width: 820mm; Can be cut to 720mm Rise: 83mm Sweep Angle: 14.7 degree backsweep, 6.7 degree upsweep Weight: 778g including shims Color: Black

KEY PERFORMANCE FACTORS SUPERIOR POWER TRANSFER An all-new ExoBeam outsole features a dual-beam design made with ultralight 100% carbon fiber for superior toe-heel stiffness. The unique design significantly boosts power transfer while allowing enough torsional flex for natural foot movement. This helps minimize lower leg strain during the pedal stroke with zero watts wasted. PERSONALIZED FIT Most cycling shoe enclosures press the foot down toward the sole. The Surge Pro’s redesigned ExoWrap system draws the foot up into the shoe, using its unique wrap-around design and new micro-adjust Li2 Boa® reels. The result is a 360-degree foot closure that gives you an ultra-comfortable and personalized fit. COOL COMFORT A new polyurethane coated mesh upper with laser cut micro-perforations delivers maximum ventilation combined with long-lasting durability. The seams are welded rather than sewn, which helps minimize weight and gives these road shoes a sleek profile with a supple feel. - All-new ExoBeam outsole features a dual-beam design made with ultralight 100% carbon fiber lay-up construction for superior toe-heel stiffness - An all-new 360º wrap-around upper with high frequency welded seams and laser cut micro-perforations for optimal ventilation and a balanced foot climate - All-new internal ExoWrap structure for an ultra-comfortable, 360-degree foot enclosure and a customizable fit - All-new exclusive performance last offers all-day comfort and increased fit options - All new micro-adjust Li2 Boa reels give a super secure and comfortable fit, Ultra grippy SharkSkin heel liner gives a secure, slip-free fit even under the harshest conditions - Removable sock liner with tunable arch support and TransTextura Plus antimicrobial layer promotes a balanced foot climate

Keep your little one warm so your routine doesn't change when the weather does. • Super soft interior is plush next to your child’s skin. • Compatible with most 5-pt harness systems and systems that include a lap belt. • Velcro backing for a perfect fit with all Burley trailers and strollers. • Recommended for children ages newborn to 2-years old. • Machine-washable.

From loose snow to icy freeze-thaw and everything in between, Wrathchild craves the best and worst winter conditions. Deep center lugs aggressively claw into unconsolidated snow for extreme acceleration and braking traction. Super tall side lugs dig into loose snow to provide predictable and confident cornering. Encounter sheer ice on your ride and Wrathchild’s concave studs tear into the surface. - Deep, aggressive lugs dig into snow - Tall side lugs provide cornering confidence - 252 concave studs tear into slick surfaces - Tubeless ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss

Topeak's Road Morph G is the perfect answer for riders who've had trouble deciding if they want a frame or floor pump. The Road Morph is both! For maximum pumping power, it features a high-volume aluminum barrel, a fold-out base, a long hose with built-in gauge and a T-handle. Of course, it fits Presta and Schrader valves and a frame mount is included, too.

Biking in the cold just got more comfortable: our Stovepipe cap protects against brutal windchill with a stretchy wind-proof shell fabric on the top and front. A soft Merino wool-blend fabric over the ears and on the back wicks moisture and helps regulate body temperature. The low-cut front covers the forehead, eliminating the cold gap between your eyewear and helmet. - Wind-blocking panels - Merino wool-blend lining for moisture wicking - Long cut protects ears, neck, and forehead - Integrated eyewear slots - 3-panel design fits perfectly under helmets

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

Easy-to-install foot for Thule Edge roof racks, for vehicles with raised railings. - Easy-to-install roof rack feet - For vehicles with raised railings - For Thule Edge roof rack systems - For raised railings Features: - Load carrier feet for Thule Edge roof rack system - Foot installs easily onto vehicles with raised railings - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Rubber lining protects the surface of the raised railings - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car

- AXS enabled for easy monitoring and firmware upgrades - Bluetooth Low Energy and ANT+ compatible - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Uses a common CR2032 battery that last for 200 riding hours and changes without tools - Power-upgrade compatible with the following RED and Force eTap AXS cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48 - Bolt Circle Diameter (BCD): 107 BCD - Power Meter Type: ANT USB

The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too! - Dome Diameter: 48mm (1.9") - Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters

Naughtvind Bibs balance warmth and breathability for unmatched comfort on cold-weather rides. We use fabric that’s water-, wind-, and abrasion-resistant on the outside and fleece-lined on the inside to keep the elements out and your body heat in. Pockets and reflective accents offer extra functionality and safety. The chamois-less design lets you pair Naughtvind Bibs with your favorite cycling shorts. We designed these winter cycling bibs to layer under our Naughtvind Pants for truly frigid days on the bike. - Chamois-less design for pairing with your favorite chamois shorts - Thermal fleece lining to retain body heat - Breathable mesh back for ventilation - 4/5 length fits with winter boots without bunching - Reflective accents for safety - Pocket storage for ride essentials - Made with sustainable materials

Power up steep climbs. Maximize your watts in the final sprint. Go longer distances with more comfort and less strain. The Surge Pro combines a new 100% thermoset carbon ExoBeam outsole combined with the BOA System closure featuring BOA Powerzone for direct pull ExoWrap support to provide a seamless connection to your bike. Promote your experience with the exact same direct power and efficiency as Giant’s pro riders. - Unique Slip-Last Construction allows the forefoot to be stiff while enabling torsional rotation of the rear and mid foot. - Unique on-the-fly micro-adjustment BOA System closure featuring BOA Powerzone with direct pull ExoWrap to support to every foot and arch type - New 100% thermoset carbon ExoBeam plate produces the lightest, stiffest plate that exceeds industry standards - Weight: 240g (size 43)

This 53" long ramp, for use with Thule EasyFold XT, makes it easier to load and unload bikes, especially for taller SUV's and vans. Features - Quickly load and unload bikes from taller vehicles by adding this longer ramp (53") to the Thule EasyFold XT - Easily attach the ramp to the Thule EasyFold XT wheel tray using the tongue and groove connection

Designed with valuable feedback from the 3-time EWS winner himself, the Sam Hill signature knee pads are the ultimate MTB knee pads for gravity riding, whatever your discipline. Light enough to be worn all day long, the Sam Hill knee pads mould with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin. CE EN1621-1:2012 Level 2. - High length compression design to prevent pad from slipping - Extra padding surrounding main knee cap for increased protection and support - Silicone printed gripper on inside of cuffs - Silicone printed logo on top and bottom outside cuffs to grip silicone on to shorts - Mesh back for increased airflow - Certified CE EN 1621-1:2012 Level 2 - Pre-curved fit for ultimate comfort - Weight 340g (size L)

The Transfer v2 is more solid than ever. From the steel construction of the original to a new Flatlock hitch cam for enhanced stability in tow. Plus, a semi-integrated cable lock for an upgrade in security. The best part? The new Transfer v2 has the modular configurations available so you get a multi-rider rack at an everyone-friendly price. - Flatlock cam for 2", ball cam for 1.25" - Includes semi-integrated bicycle cable lock - Tamper-resistant hitch security - More robust hitch design for enhanced stability in tow - Holds up to a 50" wheelbase bike (previously 47") - Holds wheels 18"-29" (previously 20"-29") - Holds tires up to 5" with accessory strap (previously 4.5") + better hook clearance for loading fat bikes - Automotive-grade 750 hour salt spray hardware - Dedicated 2" hitch version in the 2 bike configuration can be directly mounted on campers, recreational vehicles, or trailers with CHASSIS MOUNTED RECEIVERS ONLY.

Flowbeist attacks groomed single track with confidence thanks to an ultra-aggressive tread that’s ready for whatever the trail throws at it. Designed for optimal use as a front tire, its wide 4.6” footprint floats well, rolls fast and is compatible with a wide range of frames and forks. Digging into berms brings the Flowbeist alive as its tall side lugs with softer compound rubber claw the snow. Hit the brakes on tight twisty single track and the aggressive tread design digs in to keep you and your bike in control. Pair Flowbeist with its sibling rear tire, Dunderbeist, for the ultimate combination of traction and control. - 4.6” footprint - Designed for optimal use as a front tire - Aggressive side lugs comprised of soft rubber compound - Ideally paired with Dunderbeist rear tire

Versatile Adventure. All-new design with improved fit gives cyclists of all ages and types of riding a reason to ride. Features - Designed with fit and function in mind to create a value-oriented helmet packed with features - TransTextura Plus anti-microbial padding helps fight bacteria growth by pulling sweat from a rider’s head and transferring it through the AirFlow exhaust ports - Low and high speed impact-tuned construction with optimized low-density EPS, and an ultra-thin toughened polycarbonate shell - New Cinch ONE fit system offers optimal coverage by cradling the occipital bone for full protection, support and comfort and an easy dial function - Removable visor - Weight: 335g (size M/L) - Certifications: CPSC/CE;AS/NZS

Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.

Conquer with confidence. Give yourself the confidence to crush it. Whether you’re making the crux move on a technical climb or bombing down the mountain on steep, rocky terrain, you need full protection to perform at your peak. The new Rail SX was developed to meet the demands of the Giant Factory Off-Road Team’s pro enduro riders. It features an integrated MIPS Brain Protection System, and a lightweight, highly ventilated design to keep you comfortable and in control when you’re pushing your limits. FEATURES - Trail-specific maximum enduro coverage EPS construction; 3mm lower (Front), 3-5mm lower(sides), 8-10mm lower (back) - MIPS Brain Protection System optimized design - AirFlow ventilation combines 18 straight vents with straight, non-tapered walls to guide airflow through deep internal channels to keep riders cool at variable speeds - Removable moto-style extended protection visor mounts cleanly to the sides and is infinitely adjustable on the move - Integrated strap clip on the rear keeps goggle straps in position and prevents them from falling off during a crash - Low-speed and high-speed impact-tuned construction with Direct Support vents, optimized low-density EPS, and ultra-thin toughened polycarbonate shells all in-mold bonded together - Element Strap System (ESS) brings together Cinch One Pro fit system, adjustable locking dividers, and LiteForm webbing into one fit and retention system for superior fit and comfort right out of the box - Cinch One Pro fit system offers 360-degree coverage and positioning with secure, adjustable height for full protection, support and comfort - Lightweight LiteForm webbing wraps around for a more secure fit - TransTextura Plus anti-microbial padding helps fight bacteria growth by pulling sweat from a rider’s head and transferring it through the AirFlow vents. The natural property of the fabric inhibits microbes that cause odors - Dual-position integrated mounting surfaces, GoPro™ curved mount compatible for cameras and the new Giant Recon light system SPECIFICATIONS - Western: S (51-55cm);M (55-59cm);L (59-63cm) - Weight: 360g (size M, CPSC/CE) - Certifications: CPSC/CE;AS/NZS

All-new design with improved fit and MIPS protection gives cyclists of all ages and experience a reason to ride. - Designed with fit and function in mind to create a value-oriented helmet packed with features - Transtextura Plus anti-microbial padding helps fight bacteria growth by pulling sweat from a rider’s head and transferring it through the airflow exhaust ports - Low and high-speed impact-tuned construction with optimized low-density eps, and an ultra-thin toughened polycarbonate shell - New Cinch One fit system offers optimal coverage by cradling the occipital bone for full protection, support and comfort, and an easy dial function - Removable visor - Weight: 335g (size M/L) - Certifications: CPSC/CE

- Slim and lightweight nylon composite body built tough for DH and enduro riding - Concave shape and 9 replaceable pins per side for secure foot engagement - Durable chromoly steel spindle - Sealed cartridge bearing for smooth long-lasting performance - Weight: 380g